Speed 400
Cloudster Project
I received my first order from
Hobby Lobby on Tuesday before Thanksgiving. However, I did not get to open
it until this evening. Shown in the picture below are: (1) four sets of red
polarized connectors, (2) a JESI 12 Amp ESC, and (3) two motor mount wafers.
I am not sure why all of the connectors are red. Seems like half of them
should have been black? Also, I probably will not use the two motor mount
wafers now that I have a motor mount built.
Also shown in the picture below
are: (1) two Pro Lite 1350 mAh 7.4 volt battery packs, (2) two 6 volt Speed
400 motors, and (3) 1-3/16" spinner/adapter. The only things I seem to be
missing are the two props (coming in a second order) and black connectors,
which I will have to order. I may order some different type connectors as I
am not sure I even like these new ones!
The picture below shows a trial
fit of the 1-3/16" spinner/adapter mounted on the Speed 400 motor and placed
on the Cloudster plans, which shows a good fit........................Tandy