31 J-3 Cub
Excess Wood in the Stab
I didn't do much on the Cub today as I was not
feeling up to it. However, I did accomplish one task. Mike Midkiff sent me a
message several days ago suggesting that I make the lighten holes shown
below in the stab's center section bigger to eliminate all of that excess
wood.
If I made the holes bigger, they would extend out
beyond the fuselage stab mount. The excess wood is really all outside the
fuselage stab mount on the edges. So I decided to carefully remove a 1/4"
strip from each of the outside edges, which also removes excess wood where
it not needed as shown below.........................Tandy