J-3 Cub Construction Project Session #72
72 J-3 Cub Window
in To of Fuselage
I cut out the tissue in the rectangular opening on
top of the fuselage for the J-3 Cub's upper window. I cut out the styrene
rectangular window with the proper overlap and glued it in place with Formula
560 canopy glue as shown below. Putting in this slightly curved window was
simple after fussing with that windshield for several hours.
I also put a final coat of clear dope on the two
wing panels with the letter/numbers on. I am getting anxious to install the
wings and the two associated wing struts. However, I have settle this window
mask issue first.....................Tandy
Click Here to go to the
next page (73)....
