I have finally completed radio hatch cover today.
The picture below shows the two hatch openings on the bottom of the
fuselage.
In this picture, both of the hatch covers are
screwed on in place.....................Tandy
Addendum
I have finally completed the radio hatch cover
Thursday. In Wednesday's Report No. 37, I showed the picture below of the
two drilled edge blocks glued to the radio hatch cover frame along with
three planking pieces glued to the bulkheads.
The picture below shows the two hatch
openings on the bottom of the fuselage.
I finished planking the radio hatch cover and
screwed it over the radio hatch opening. I took this picture so you could
see how the two edge blocks of the radio hatch cover have to be trimmed
off.
In this picture, both of the two edge blocks on
the radio hatch cover have been trimmed down to fit the fuselage's bottom
contour.....................Tandy
