Sailplane Construction Project Session #39
Comet Sailplane Project
Today I glued in all four stringers on the bottom
of the Sailplane fuselage as shown below. You really have to take your time
in order to get them straight.
Since the removable radio hatch cover is right in
front of the bottom stringer attachment bulkhead, I added a back up 3/16"
bulkhead to the 3/32" bulkhead. When covering with silk, the dope tends to
pull the silk down into the square corners of the stringer attach point, so
I added stringer fillets to prevent this from happening as shown
Click Here to go to the
next page (40)....