Sailplane Construction Project Session #69
Yesterday I installed the landing gear on the
fuselage in order to locate and make the cut outs in the rear bulkhead of
the cowl for the main struts of landing gear. In the picture below, you
see the 1/8" landing gear wire emerging out the rear cowl cut out on the
Here you can see both sides of the landing gear
wires coming out from behind the cowl.
This picture shows the entire fuselage up on the
landing gear, cowl installed, and a 2-1/4" aluminum spinner mounted on the
front of the engine......................Tandy
Click Here to go to the
next page (70)....